New

Spring Return Bollard - Dedicated Parking Click and Collect or Pick up Zone

Rating:
100% of 100
In stock
SKU
LRB005

Dedicated Parking Space compliant Spring Return Bollards feature a powder coated ø150mm OD Aluminium Sleeve with a 2.4m Galvanised Sign Post and fully customised Signage, full 360° self recovery from impact

A$800.00
 

Spring Return Bollards are designed to yield on impact and then return to vertical, avoiding expensive damage whilst also lowering the injury potential of minor accidents.

This Dedicated Parking bollard is ø150mm OD, 1.3m high and powder coated "SAFETY YELLOW" with a 2.4m Galvanised Sign Post and fully customised Signage to meet your Branding or site requirements.

Your Dedicated Parking spaces are not only compliant to AS2890.6-2009 but also provide maximum protection for both site and vehicle damage from accidental impact.

This Bollard will save you $$$ in ongoing maintenance cost.

- Spring Return Bollards have full 360° self recovery from impact.

- Spring Return Bollards are supplied standard as surface mount.

- See "Installation Tab" below for all installation options

More Information
Key Features

This Bollard is fully compliant with AS2890.6-2009 as adopted by the the Building Code of Australia 2011.

This product is a breeze to install, our Spring Return Signpost provides an impact friendly, low damage. low maintenance carparking space.

Spring Return Bollards are designed to yield on impact and then return to vertical, avoiding expensive damage whilst also lowering the injury potential of minor accidents.

By absorbing the initial impact Spring Return Bollards, warn drivers they are out of position before significant vehicle or site damage can occur. 

Spring Return Bollards have full 3600 self recovery from impact.

Spring Return Bollards are supplied standard as surface mount. However concrete in installation is possible when used in conjunction with the SA411 Socket Mount adaptor kit. See Installation Tab above or Technical / Installation page.

Spring Return Bollards saves $$$ by protecting both the installation and the vehicle driver from damage and quickly recover their initial cost.

Key Features:

* Highly visible parking bay location

* Yields on impact from any angle

* Easy to Install

* Delivers Long Term Value

* Allows driver to stop before serious installation or vehicle damage occurs

Applications:

* Click and Collect Dedicated Parking Bays

* disabled carparks

* shared vehicle and pedestrian zones

* cycelways

* sidewalks

* Municipal / commercial buildings

* lane delineation

 

Full  technical installation drawings can be downloaded by clicking the Installation tab above or going to the Technical Information page.

Specifications

Product Specifications

Part Number: LRB005

Post Material:  ø150mm OD Aluminium + 2.4m 50NB Galvanised Sign Post

Post Colour: Powder Coat Safety Yellow Std (Colour variants on request)

Base Material: Glavanised Steel

Mass: 17kg

Dimensions: 2400mm (high) x 200mm x 200mm

Impact Yield Weight: 10kg

Installation

Installation Instructions for Spring Return Bollards are also available from the Technical/ Information Page

 

Click on image


Installation Instruction: 

Lane Divider Installation Instructions

Support Information

All JMB sign post products are where possible made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 

 

Click on Image

 

Product Information: 

Spring Return Bollard Product Brochure

 

 

 Disabled Bollard Flyer

Click on Image

 

Product Information: 

1,3m Disabled Parking Space Compliant - Spring Return Bollard Product Brochure

 

 

Write Your Own Review
You're reviewing: Spring Return Bollard - Dedicated Parking Click and Collect or Pick up Zone
Your Rating

This Bollard is fully compliant with AS2890.6-2009 as adopted by the the Building Code of Australia 2011.

This product is a breeze to install, our Spring Return Signpost provides an impact friendly, low damage. low maintenance carparking space.

Spring Return Bollards are designed to yield on impact and then return to vertical, avoiding expensive damage whilst also lowering the injury potential of minor accidents.

By absorbing the initial impact Spring Return Bollards, warn drivers they are out of position before significant vehicle or site damage can occur. 

Spring Return Bollards have full 3600 self recovery from impact.

Spring Return Bollards are supplied standard as surface mount. However concrete in installation is possible when used in conjunction with the SA411 Socket Mount adaptor kit. See Installation Tab above or Technical / Installation page.

Spring Return Bollards saves $$$ by protecting both the installation and the vehicle driver from damage and quickly recover their initial cost.

Key Features:

* Highly visible parking bay location

* Yields on impact from any angle

* Easy to Install

* Delivers Long Term Value

* Allows driver to stop before serious installation or vehicle damage occurs

Applications:

* Click and Collect Dedicated Parking Bays

* disabled carparks

* shared vehicle and pedestrian zones

* cycelways

* sidewalks

* Municipal / commercial buildings

* lane delineation

 

Full  technical installation drawings can be downloaded by clicking the Installation tab above or going to the Technical Information page.

Product Specifications

Part Number: LRB005

Post Material:  ø150mm OD Aluminium + 2.4m 50NB Galvanised Sign Post

Post Colour: Powder Coat Safety Yellow Std (Colour variants on request)

Base Material: Glavanised Steel

Mass: 17kg

Dimensions: 2400mm (high) x 200mm x 200mm

Impact Yield Weight: 10kg

Installation Instructions for Spring Return Bollards are also available from the Technical/ Information Page

 

Click on image


Installation Instruction: 

Lane Divider Installation Instructions

All JMB sign post products are where possible made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 

 

Click on Image

 

Product Information: 

Spring Return Bollard Product Brochure

 

 

 Disabled Bollard Flyer

Click on Image

 

Product Information: 

1,3m Disabled Parking Space Compliant - Spring Return Bollard Product Brochure

 

 

You may also like!