Tall Spring Return Signpost and R1-1A Sign Kit

In stock
SKU
TP140203-R1-1A

TP140203-R1-1A Tall Spring Return Signpost Surface Mount - 2.8m Steel Post and R1-1A Stop Sign

A$290.86

Supplied Ready to Install! This kit Includes:

- 1 x Impact recovering TP140203 surface mount signpost with 2.8m Steel Post

- 1 x Aluminium Sign R1-1A 

- 2 x TD1 Sign Mounting Brackets

All you have to do is bolt it down and its Ready to Go!

360° Impact recovering Spring Return Signposts are the ultimate low maintenance solution. Saving $$$.

Ideal for roundabouts, intersections,car parks.

This is the only 360° impact recovering signpost in the world that can achieve a 2.2m clearance under the sign

More Information
Key Features

The patented Spring Return Signpost system transforms a standard signpost installation into a, full 360 degree impact recovering, passive safe signpost installation. Spring Return Sign Posts will always return to vertical after impact with the sign still in the correct orientation.

Thes units are supplied with a 60mm OD (2-3/8”) 2.8m (110") steel signpost factory fitted and are ready to use. Typical applications include; traffic islands, parking signs,car parks, round abouts, causeways etc.

Red Spring Base units are supplied as surface mounts (pictured) but can be adapted to socket mount locations using a Socket Mount Adaptor Kit.

Spring Return Signpost saves $$$ by protecting both the installation and the vehicle driver from damage. Spring Return Signposts will recover their purchase cost by surviving just one impact while also eliminating reoccurring site damage.


Key Features:

* Patented product with patents granted in USA, Australia , Singapore and Europe

* Tough!! Made from Galvanised Steel

* Signs do not flutter in the wind like urethane products

* Posts and Signs always reorientates back into their original position after impact

* Engineered so the upward force feels light when the signpost is fully bent over,

minimising drive over vehicle damage and the chance for hook ups

* SRS Bases are designed  to accept wide variety of posts and bollards to suit any market

* Posts can be changed, altered or replaced without changing the base unit

* SRS product has complete over 1000 test cycles and still remained functional

* The patented design means no shear load is ever place on the connecting cables

* Peace of mind with thousands of Spring Return Signposts units now installed around the world

 

Full  technical installation drawings, and a complete list of compatible post types can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Specifications

Signpost Size Specifications:

* Steel CHS Post 60mm OD or (2-3/8”)

* Wall 2.3mm or (3/32”)

 

Signpost Height:

* 2800mm (110”) from ground level

* 2200mm (86.5”) under sign clearance

 

Sign:

*R1-1A 600 x 600mm "STOP" sign

 

Custom Applications:

* Contact us if you have a custom application and we will help.

Installation

Click Below for  Specific Technical Information on Red Spring SRS Surface Mount Signposts or refer to the Technical / Installation page

 

Click on image

 

Technical Drawing 10:
Applicable Signpost Heights – Red Spring Return Signpost Units

Click on image

Technical Drawing 6: 
Surface Mount Installation

 

Click on image

Technical Drawing 7: 
Wizard Socket Installation using a Socket Mount Adaptor

 

Click on image

Technical Drawing 8: 

Ground Sleeve Installation using a Socket Mount Adaptor

 

Click on image

Technical Drawing 9: 

Concrete In Installation using a Socket Mount Adaptor

Support Information

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 

Product Approval Letters

       Main Roads – Queensland Australia
       Main Roads – Western Australia

       Alberta Canada Section 312
       CE Certification Europe


 red spring flyer

Click on Image

 

Product Information: 

Red Spring SRS Unit Product Brochure

 

 

SRS safety Sheet

Click on Image


Safety Sheet: 

Safe-Post Requirements for Spring Return Signposts Posts

SRS replace post

Click on Image


Information Sheet:

 
Fitting and Replacing the Removable Posts into Spring Return Signpost Base Units
Write Your Own Review
You're reviewing: Tall Spring Return Signpost and R1-1A Sign Kit
Your Rating

The patented Spring Return Signpost system transforms a standard signpost installation into a, full 360 degree impact recovering, passive safe signpost installation. Spring Return Sign Posts will always return to vertical after impact with the sign still in the correct orientation.

Thes units are supplied with a 60mm OD (2-3/8”) 2.8m (110") steel signpost factory fitted and are ready to use. Typical applications include; traffic islands, parking signs,car parks, round abouts, causeways etc.

Red Spring Base units are supplied as surface mounts (pictured) but can be adapted to socket mount locations using a Socket Mount Adaptor Kit.

Spring Return Signpost saves $$$ by protecting both the installation and the vehicle driver from damage. Spring Return Signposts will recover their purchase cost by surviving just one impact while also eliminating reoccurring site damage.


Key Features:

* Patented product with patents granted in USA, Australia , Singapore and Europe

* Tough!! Made from Galvanised Steel

* Signs do not flutter in the wind like urethane products

* Posts and Signs always reorientates back into their original position after impact

* Engineered so the upward force feels light when the signpost is fully bent over,

minimising drive over vehicle damage and the chance for hook ups

* SRS Bases are designed  to accept wide variety of posts and bollards to suit any market

* Posts can be changed, altered or replaced without changing the base unit

* SRS product has complete over 1000 test cycles and still remained functional

* The patented design means no shear load is ever place on the connecting cables

* Peace of mind with thousands of Spring Return Signposts units now installed around the world

 

Full  technical installation drawings, and a complete list of compatible post types can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Signpost Size Specifications:

* Steel CHS Post 60mm OD or (2-3/8”)

* Wall 2.3mm or (3/32”)

 

Signpost Height:

* 2800mm (110”) from ground level

* 2200mm (86.5”) under sign clearance

 

Sign:

*R1-1A 600 x 600mm "STOP" sign

 

Custom Applications:

* Contact us if you have a custom application and we will help.

Click Below for  Specific Technical Information on Red Spring SRS Surface Mount Signposts or refer to the Technical / Installation page

 

Click on image

 

Technical Drawing 10:
Applicable Signpost Heights – Red Spring Return Signpost Units

Click on image

Technical Drawing 6: 
Surface Mount Installation

 

Click on image

Technical Drawing 7: 
Wizard Socket Installation using a Socket Mount Adaptor

 

Click on image

Technical Drawing 8: 

Ground Sleeve Installation using a Socket Mount Adaptor

 

Click on image

Technical Drawing 9: 

Concrete In Installation using a Socket Mount Adaptor

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 

Product Approval Letters

       Main Roads – Queensland Australia
       Main Roads – Western Australia

       Alberta Canada Section 312
       CE Certification Europe


 red spring flyer

Click on Image

 

Product Information: 

Red Spring SRS Unit Product Brochure

 

 

SRS safety Sheet

Click on Image


Safety Sheet: 

Safe-Post Requirements for Spring Return Signposts Posts

SRS replace post

Click on Image


Information Sheet:

 
Fitting and Replacing the Removable Posts into Spring Return Signpost Base Units
You may also like!