Spring Return Signpost and R2-3A Sign Kit - Plastic Post

Out of stock
SKU
DP104201-R2-3A

DP104201-R2-3A Spring Return Signpost Socket Mount - 1.4m Plastic Post and R2-3A Keep Left Sign

A$226.89

Supplied Ready to Install! This kit Includes:

- 1 x Impact recovering DP104201 socket mount signpost with 1.4m Plastic Post

- 1 x Aluminium Sign R2-3A

- 2 x TD1 Sign Mounting Brackets

Socket Mount units simply drop into existing post sites, as if they were just a plain signpost Ready to Go!

360° Impact recovering Spring Return Signposts are the ultimate low maintenance solution. Saving $$$.

Ideal for Car park use and Pedestrian Areas

More Information
Key Features

The patented Spring Return Signpost system transforms a standard signpost installation into a, full 360 degree impact recovering, passive safe signpost installation. Spring Return Sign Posts will always return to vertical after impact with the sign still in the correct orientation.

These units are supplied with a 60mm OD (2-3/8”) 1.4m (55") plastic signpost factory fitted and are ready to use. The less aggressive black spring and plastic post combination makes it ideal for high pedestrian areas and car parks.

Black Spring Units are equally suitable for road use. Typical applications include; traffic islands, splitter island, car parks, round abouts, causeways etc.

Spring Return Signposts are supplied as socket mounts (pictured) or surface mount versions (see related products) for ease of installation into any site.

Spring Return Signpost saves $$$ by protecting both the installation and the vehicle driver from damage. Spring Return Signposts will recover their purchase cost by surviving just one impact while also eliminating reoccurring site damage.


Key Features:

* Patented product with patents granted in USA, Australia , Singapore and Europe

* Tough!! Base Units Made from Galvanised Steel

* Posts made for our own formulation of high quality, high impact modified PVC. (Accelerated weather tested)

* Signs do not flutter in the wind like urethane products

* Posts and Signs always reorientates back into their original position after impact

* Low Ground clearance when bent over

*Engineered so the upward force feels light when the signpost is fully bent over, minimising

drive over vehicle damage and the chance for hook ups

* SRS Bases are designed  to accept wide variety of posts and bollards to suit any market

* Posts can be changed, altered or replaced without changing the base unit

* SRS product has complete over 1000 test cycles and still remained functional

* The patented design means no shear load is ever place on the connecting cables

* Peace of mind with thousands of Spring Return Signposts units now installed around the world

 

Full  technical installation drawings, and a complete list of compatible post types can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Specifications

Signpost Size Specifications:

* Plastic CHS Post 60mm OD or (2-3/8”)

* Wall 3.8mm or (9/64”)

 

Signpost Height:

* 1400mm (55”) from ground level

 

Sign:

* R2-3A 600 x 450mm sign

 

Custom Applications:

* Contact us if you have a custom application and we will help.

Installation

 Click Below for Specific Technical Information on Black Spring SRS Socket Mount Signposts or refer to the Technical / Installation page

 Wixard Socket Installation

Click on image

 

Technical Drawing 2:
Socket Mount Base Installation – Wizard Socket

 Ground Sleeve Installation

Click on image

 

 

Technical Drawing 4:
Installation – Ground Sleeve (Covers both existing installations & new installations)

 Plastic Post Sizes

Click on image
  

 

Technical Drawing 3:
Applicable Signpost Heights – Black Spring Return Signpost Units
  
Support Information

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

JMB recommends using our own special plastic post formulation for plastic  posts as it specifically blended to match the Spring Return Signposts operational characteristics in high impact environments

Product Approval Letters

       Main Roads – Queensland Australia
       Main Roads – Western Australia
;
       Alberta Canada Section 312


 Balck Spring Flyer

Click on Image

 

Product Information: 

Black Spring SRS Unit Product Brochure

 

 

SRS Safe Post

Click on Image


Safety Sheet: 

Safe-Post Requirements for Spring Return Signposts Posts

SRS Replace Post

Click on Image


Information Sheet:

 
Fitting and Replacing the Removable Posts into Spring Return Signpost Base Units
Write Your Own Review
You're reviewing: Spring Return Signpost and R2-3A Sign Kit - Plastic Post
Your Rating

The patented Spring Return Signpost system transforms a standard signpost installation into a, full 360 degree impact recovering, passive safe signpost installation. Spring Return Sign Posts will always return to vertical after impact with the sign still in the correct orientation.

These units are supplied with a 60mm OD (2-3/8”) 1.4m (55") plastic signpost factory fitted and are ready to use. The less aggressive black spring and plastic post combination makes it ideal for high pedestrian areas and car parks.

Black Spring Units are equally suitable for road use. Typical applications include; traffic islands, splitter island, car parks, round abouts, causeways etc.

Spring Return Signposts are supplied as socket mounts (pictured) or surface mount versions (see related products) for ease of installation into any site.

Spring Return Signpost saves $$$ by protecting both the installation and the vehicle driver from damage. Spring Return Signposts will recover their purchase cost by surviving just one impact while also eliminating reoccurring site damage.


Key Features:

* Patented product with patents granted in USA, Australia , Singapore and Europe

* Tough!! Base Units Made from Galvanised Steel

* Posts made for our own formulation of high quality, high impact modified PVC. (Accelerated weather tested)

* Signs do not flutter in the wind like urethane products

* Posts and Signs always reorientates back into their original position after impact

* Low Ground clearance when bent over

*Engineered so the upward force feels light when the signpost is fully bent over, minimising

drive over vehicle damage and the chance for hook ups

* SRS Bases are designed  to accept wide variety of posts and bollards to suit any market

* Posts can be changed, altered or replaced without changing the base unit

* SRS product has complete over 1000 test cycles and still remained functional

* The patented design means no shear load is ever place on the connecting cables

* Peace of mind with thousands of Spring Return Signposts units now installed around the world

 

Full  technical installation drawings, and a complete list of compatible post types can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Signpost Size Specifications:

* Plastic CHS Post 60mm OD or (2-3/8”)

* Wall 3.8mm or (9/64”)

 

Signpost Height:

* 1400mm (55”) from ground level

 

Sign:

* R2-3A 600 x 450mm sign

 

Custom Applications:

* Contact us if you have a custom application and we will help.

 Click Below for Specific Technical Information on Black Spring SRS Socket Mount Signposts or refer to the Technical / Installation page

 Wixard Socket Installation

Click on image

 

Technical Drawing 2:
Socket Mount Base Installation – Wizard Socket

 Ground Sleeve Installation

Click on image

 

 

Technical Drawing 4:
Installation – Ground Sleeve (Covers both existing installations & new installations)

 Plastic Post Sizes

Click on image
  

 

Technical Drawing 3:
Applicable Signpost Heights – Black Spring Return Signpost Units
  

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

JMB recommends using our own special plastic post formulation for plastic  posts as it specifically blended to match the Spring Return Signposts operational characteristics in high impact environments

Product Approval Letters

       Main Roads – Queensland Australia
       Main Roads – Western Australia
;
       Alberta Canada Section 312


 Balck Spring Flyer

Click on Image

 

Product Information: 

Black Spring SRS Unit Product Brochure

 

 

SRS Safe Post

Click on Image


Safety Sheet: 

Safe-Post Requirements for Spring Return Signposts Posts

SRS Replace Post

Click on Image


Information Sheet:

 
Fitting and Replacing the Removable Posts into Spring Return Signpost Base Units
You may also like!