G2 Spike Driver Installation Kit

In stock
SKU
WIZ003-GS001K

WIZ003-GS001K - G2 Driver Installation Kit for the GS001 Turn and Lock™ Ground Spike.

A$197.00

Complete Installation Kit for installing the GS001 Turn and Lock™ Ground Spike.

Simply fits onto the GS001 Ground Spike for easy installation.

Click the Installation tab for Installation Information

More Information
Key Features

G2 Spike Driver Installation Kit for the GS001 Turn and Lock™ Ground Spike.

The driver is designed to slide into the top of the GS001 Ground Spike to allow for ground spike guidance during installation. JMB's driving tools are designed to protect the top Turn and Lock™ plate while the ground spike is being driven.

To Use this driver tool:

Simply insert the WIZ003-GS001K  Installation Kit into the GS001 ground spike until the fin tops are in contact with the base of the slots in the driver tool.

Align the markings on the ground spike with the traffic flow, then drive the spike into the ground.

Once complete remove the driver from the ground spike.

Click the Installation tab for more detailed Installation Information

Specifications

Product Specifications

Material: Steel

Finish: As Machined

Mass: 4.6kg

Dimensions: 350mm x 80mm x 55mm (high)

Connection: Turn and Lock™ system

Installation

Installation Instructions for Turn and Lock Ground Spikes ;are also available from the Technical/ Information Page

 

tech dwg driven spike

 Click on image

 


Technical Instruction:

Installation Dwg - Ground Spike

 

 

Click on image


Installation Instruction: 

Installation Guide - Ground Spike


 
Click on image 
 


Removal Instruction

Removal Instruction - Ground Spike

Write Your Own Review
You're reviewing: G2 Spike Driver Installation Kit
Your Rating

G2 Spike Driver Installation Kit for the GS001 Turn and Lock™ Ground Spike.

The driver is designed to slide into the top of the GS001 Ground Spike to allow for ground spike guidance during installation. JMB's driving tools are designed to protect the top Turn and Lock™ plate while the ground spike is being driven.

To Use this driver tool:

Simply insert the WIZ003-GS001K  Installation Kit into the GS001 ground spike until the fin tops are in contact with the base of the slots in the driver tool.

Align the markings on the ground spike with the traffic flow, then drive the spike into the ground.

Once complete remove the driver from the ground spike.

Click the Installation tab for more detailed Installation Information

Product Specifications

Material: Steel

Finish: As Machined

Mass: 4.6kg

Dimensions: 350mm x 80mm x 55mm (high)

Connection: Turn and Lock™ system

Installation Instructions for Turn and Lock Ground Spikes ;are also available from the Technical/ Information Page

 

tech dwg driven spike

 Click on image

 


Technical Instruction:

Installation Dwg - Ground Spike

 

 

Click on image


Installation Instruction: 

Installation Guide - Ground Spike


 
Click on image 
 


Removal Instruction

Removal Instruction - Ground Spike

You may also like!