Mid Lane Divider Kit - Yellow / Black Reflective Decals

In stock
SKU
LD171201-YB

Mid Island Divider Kits are a complete unit supplied ready to install. Mid Island Segments are inclusive of both the Spring Return Blade with Yellow / Black Decals and the Rubber Island Segment

A$190.00
  • Buy 50 for A$135.00 each and save 29%
 

Mid Island Divider Kits are a complete unit supplied ready to install. This Kit includes both the Mid Island Segment and a Spring Return Blade fitted with industry standard 750 x 187 Yellow / Black Decals both sides. Each divider segment interlocks together allowing a dividing barrier to be formed for any length and application.

Click the Features tab below for more Information

Click the Specifications tab below to see the components that make up this kit, as well as size and pitch information.

Click the Installation tab for complete installation instructions

DON"T FORGET YOU WILL NEED A MALE AND A FEMALE END SEGMENT TO COMPLETE EACH RUN!

More Information
Key Features

JMB Kits are simple one click orders that includes all the components required to complete the product as pictured. Ready To Install! All components in a kit can also be purchased separately to your requirements.

Spring Return Lane Divider Blades use JMB's patented Generation 2 Spring Return Base Units as the self recovering engine. Generation 2 base units share all the key features and toughness of our proven steel based Spring return Signposts. Each divider segment interlocks together allowing a dividing barrier to be formed for any length and application.

Spring Return Lane Divider Blades are fitted with industry standard 750mm x 187mm Class 1 Reflectors in a variety of patterns on both sides. This order code is for Yellow and Black relflective decals both sides.

Lane Dividers use JMB's interchangable Turn and LockTM connection system so they can be fitted and removed in seconds. Blades can be removed and fitted multiple times with out loss of function.  Alternate posts using the Turn and Lock TM connection system can also be used in place if the blade.

 Key Features:

* Spring Return Base Units have been successfully been tested at 100 kmh

* 3600 self recovery

* Guaranteed Blade realignment after impact

* New Turn and LockTM base connection system for quick removal and replacement

* Multiple Alternate ground connection options are available

* Customisable post and decal options can be arranged

* Peace of mind using a quality and proven Australian system

Technical drawings, Installation drawings can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Further product information can be downloaded cy clicking the Support tab above or going to the Technical Information page.

Specifications

LD171201-YB Order Code Includes:

* 1 piece G2171201-YB Spring Return Blade 750 x 187 (inlcudes 750 x 187mm Yellow / Black decals both sides)

* 1 piece Mid Island Segment Yellow

Product Specifications - LD001 Mid Island Segment

Material:  Rubber

Mass: 15kg

Dimensions: 1120mm x 250mm x 90mm (high)

Pitch Per Segment: 995mm

Colour: Yellow

Connection: Turn and Lock system

 Product Specifications - G2171201 Spring Return Blade

Material:  HDPE

Colour: Orange

Mass: 1.7kg

Blade Overall Size: 1050mm x 234mm x 50mm

Decal Size: 750mm x 187.5mm

Decal Pattern: Diagonal Stripe Yellow/ Black

No Decals Fitted: 2

Custom Applications:

  • Contact us if you have a custom application and we will help.
Installation

Installation Instructions for Spring Return Lane Divders are also available from the Technical/ Information Page

Lane Divider Image 

Click on image


Installation Instruction: 

Lane Divider Installation Instructions

TD Lane Divider Install

Click on image 

 

Technical Drawing

 Turn and LockTM Lane Divider Installation

 

 Blade Replacemt Instructions


Click on image 


Installation Instruction

Turn and LockTM Blade Replacemnt Instruction

Support Information

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that:

*  Deliver significant ongoing cost savings

*  Provide s Passive Safe road product solution

*  Use 100% recyclable material where possible

  

Click on Image


Product Information: 

Spring Return Lane Divider Brochure

 

 

Write Your Own Review
You're reviewing: Mid Lane Divider Kit - Yellow / Black Reflective Decals
Your Rating

JMB Kits are simple one click orders that includes all the components required to complete the product as pictured. Ready To Install! All components in a kit can also be purchased separately to your requirements.

Spring Return Lane Divider Blades use JMB's patented Generation 2 Spring Return Base Units as the self recovering engine. Generation 2 base units share all the key features and toughness of our proven steel based Spring return Signposts. Each divider segment interlocks together allowing a dividing barrier to be formed for any length and application.

Spring Return Lane Divider Blades are fitted with industry standard 750mm x 187mm Class 1 Reflectors in a variety of patterns on both sides. This order code is for Yellow and Black relflective decals both sides.

Lane Dividers use JMB's interchangable Turn and LockTM connection system so they can be fitted and removed in seconds. Blades can be removed and fitted multiple times with out loss of function.  Alternate posts using the Turn and Lock TM connection system can also be used in place if the blade.

 Key Features:

* Spring Return Base Units have been successfully been tested at 100 kmh

* 3600 self recovery

* Guaranteed Blade realignment after impact

* New Turn and LockTM base connection system for quick removal and replacement

* Multiple Alternate ground connection options are available

* Customisable post and decal options can be arranged

* Peace of mind using a quality and proven Australian system

Technical drawings, Installation drawings can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Further product information can be downloaded cy clicking the Support tab above or going to the Technical Information page.

LD171201-YB Order Code Includes:

* 1 piece G2171201-YB Spring Return Blade 750 x 187 (inlcudes 750 x 187mm Yellow / Black decals both sides)

* 1 piece Mid Island Segment Yellow

Product Specifications - LD001 Mid Island Segment

Material:  Rubber

Mass: 15kg

Dimensions: 1120mm x 250mm x 90mm (high)

Pitch Per Segment: 995mm

Colour: Yellow

Connection: Turn and Lock system

 Product Specifications - G2171201 Spring Return Blade

Material:  HDPE

Colour: Orange

Mass: 1.7kg

Blade Overall Size: 1050mm x 234mm x 50mm

Decal Size: 750mm x 187.5mm

Decal Pattern: Diagonal Stripe Yellow/ Black

No Decals Fitted: 2

Custom Applications:

  • Contact us if you have a custom application and we will help.

Installation Instructions for Spring Return Lane Divders are also available from the Technical/ Information Page

Lane Divider Image 

Click on image


Installation Instruction: 

Lane Divider Installation Instructions

TD Lane Divider Install

Click on image 

 

Technical Drawing

 Turn and LockTM Lane Divider Installation

 

 Blade Replacemt Instructions


Click on image 


Installation Instruction

Turn and LockTM Blade Replacemnt Instruction

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that:

*  Deliver significant ongoing cost savings

*  Provide s Passive Safe road product solution

*  Use 100% recyclable material where possible

  

Click on Image


Product Information: 

Spring Return Lane Divider Brochure

 

 

You may also like!