1.1m G2 Spring Return Signpost

In stock
SKU
G2174201

G2174201 Spring Return Signposts  feature quick changeover using our Turn and Lock™ connection system. This signpost is best suited for signs up to 450mm wide x 600mm high

A$50.00
 

G2174201 - 1.1m G2 Spring Return Signpost.

G2 Spring Return Sign Posts are a budget alternative to our steel based Spring Return Sign Posts. G2 signposts feature quick post changeovers using our Turn and Lock™ Connection System

This signpost is best suited for signs up to 450mm wide x 600mm high.

This signpost is not supplied pre-drilled to mount a sign. You can request predrilled sign mounting holes at no extra cost. Please refer to the Specifications Tab below for detail.

This product code for a Signpost only! Remember to select a mounting option and sign panel option suitable to your location requirments.

Click the tabs below for more Information

More Information
Key Features

G2 Spring Return Sign Posts are a budget alternative signpost to our steel based Spring return sign post range. G2 Spring Return sign posts share all the same 360° impact recovering features and benefits of JMB’s other Spring Return products.

Fitted with a 48mm OD post, this signpost is suitable for mounting sign panels up to 450mm wide x 600mm high.Typically signs like the R2-3A Keep Left Sign.

For mounting longer thinner signs please select the G2175201- 1.4m G2 Spring Return Signpost.

G2 signposts utilise JMB's Turn and Lock™ connection system which is commonly used throughout the entire G2 range of products. Any Turn and Lock™ base connection option can be used with G2 signposts, providing a quick installation and removal method that can be used and multiple times with out loss of function.

G2 signposts are seamlessly interchangeable with all other G2 products like spring return guideposts and lane divider blades.

Key Features:


* G2 Spring Return base has been successfully tested at 100 kmh

* 3600 self recovery

* Guaranteed Post and Sign realignment after impact

* New Turn and LockTM base connection system for quick removal and replacement

* Multiple Alternate ground connection options are available

* Customisable post and sign options can be arranged

* Peace of mind using a quality and proven Australian system

Technical drawings, Installation drawings can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Further product information can be downloaded by clicking the Support tab above or going to the Technical Information page.

Specifications

 Product Specifications - G2174201 G2 Spring Return Signpost

Material: Impact Modified PVC

Colour: White

Mass: 1.1kg

Overall Height: 1050mm

Post Diameter: ø48mm OD

Sign Carrying Capacity: 1 sign x 450mm wide x 600mm high (Aluminium or Flexy-Tough™ substrate)

Recommended Sign Mounting: Galvanised Cuphead Bolts M10 x 60 + Nyloc Nut

Predrilled Sign Mounting Holes:

Due to the wide variation in sign mouting hole positions across Australia, this product is supplied standard with no sign mounting holes pre-drilled.

JMB will pre-drill sign mounting holes for FREE upon request. Send us the hole drilling details by either:

1) Adding the hole position specifications into the comments field at the checkout

2) Simply send an email to websales@jmbsignposts.com with the order number and the holes position specifications.

Installation

G2 Spring Return Signposts share the same installation instructions as Spring Return Guideposts. These documents can also be downloaded via the Technical/ Information Page

Installation instructional Videos are available on the Technical/ Information Page

 

tech dwg driven spike

Click on image

 

Technical Instruction: 

 G2 Spring Return Signpost Post Drillling Guide

 

tech dwg driven spike

 Click on image

 


Technical Instruction: 

 Spring Return Guidepost Installation Guide - Ground Spike

 

tech dwg BP420

Click on image  

 

Technical Instruction: 

 

 Spring Return Guidepost Installation Guide - Surface Mount

 

 

Click on image


Installation Instruction: 

Spring Return Guidepost Installation Guide - Ground Spike


 

Click on image 
 
 


Removal Instruction

Spring Return Guidepost Removal Guide - Ground Spike

 

Click on image 

 

Installation Instruction: 

Spring Return Guidepost Installation Guide - Surface Mount

 

Click on image 


Installation Instruction

Turn and LockTM Guidepost Replacement Instruction

Support Information

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 


Signpost Flyer

Click on Image


Product Information: 

Spring Return Signpost Brochure

 

 

Write Your Own Review
You're reviewing: 1.1m G2 Spring Return Signpost
Your Rating

G2 Spring Return Sign Posts are a budget alternative signpost to our steel based Spring return sign post range. G2 Spring Return sign posts share all the same 360° impact recovering features and benefits of JMB’s other Spring Return products.

Fitted with a 48mm OD post, this signpost is suitable for mounting sign panels up to 450mm wide x 600mm high.Typically signs like the R2-3A Keep Left Sign.

For mounting longer thinner signs please select the G2175201- 1.4m G2 Spring Return Signpost.

G2 signposts utilise JMB's Turn and Lock™ connection system which is commonly used throughout the entire G2 range of products. Any Turn and Lock™ base connection option can be used with G2 signposts, providing a quick installation and removal method that can be used and multiple times with out loss of function.

G2 signposts are seamlessly interchangeable with all other G2 products like spring return guideposts and lane divider blades.

Key Features:


* G2 Spring Return base has been successfully tested at 100 kmh

* 3600 self recovery

* Guaranteed Post and Sign realignment after impact

* New Turn and LockTM base connection system for quick removal and replacement

* Multiple Alternate ground connection options are available

* Customisable post and sign options can be arranged

* Peace of mind using a quality and proven Australian system

Technical drawings, Installation drawings can be downloaded by clicking  the Installation tab above or going to the Technical Information page.

Further product information can be downloaded by clicking the Support tab above or going to the Technical Information page.

 Product Specifications - G2174201 G2 Spring Return Signpost

Material: Impact Modified PVC

Colour: White

Mass: 1.1kg

Overall Height: 1050mm

Post Diameter: ø48mm OD

Sign Carrying Capacity: 1 sign x 450mm wide x 600mm high (Aluminium or Flexy-Tough™ substrate)

Recommended Sign Mounting: Galvanised Cuphead Bolts M10 x 60 + Nyloc Nut

Predrilled Sign Mounting Holes:

Due to the wide variation in sign mouting hole positions across Australia, this product is supplied standard with no sign mounting holes pre-drilled.

JMB will pre-drill sign mounting holes for FREE upon request. Send us the hole drilling details by either:

1) Adding the hole position specifications into the comments field at the checkout

2) Simply send an email to websales@jmbsignposts.com with the order number and the holes position specifications.

G2 Spring Return Signposts share the same installation instructions as Spring Return Guideposts. These documents can also be downloaded via the Technical/ Information Page

Installation instructional Videos are available on the Technical/ Information Page

 

tech dwg driven spike

Click on image

 

Technical Instruction: 

 G2 Spring Return Signpost Post Drillling Guide

 

tech dwg driven spike

 Click on image

 


Technical Instruction: 

 Spring Return Guidepost Installation Guide - Ground Spike

 

tech dwg BP420

Click on image  

 

Technical Instruction: 

 

 Spring Return Guidepost Installation Guide - Surface Mount

 

 

Click on image


Installation Instruction: 

Spring Return Guidepost Installation Guide - Ground Spike


 

Click on image 
 
 


Removal Instruction

Spring Return Guidepost Removal Guide - Ground Spike

 

Click on image 

 

Installation Instruction: 

Spring Return Guidepost Installation Guide - Surface Mount

 

Click on image 


Installation Instruction

Turn and LockTM Guidepost Replacement Instruction

All JMB sign post products are made from materials that are 100% recyclable, providing sustainable products that have zero impact on land fill.

 JMB's goal is to make products that: 

* Deliver significant ongoing cost savings

* Provide a Passive Safe road signpost solution

* Use 100% recyclable materials where possible

 


Signpost Flyer

Click on Image


Product Information: 

Spring Return Signpost Brochure

 

 

You may also like!